Filter
Top Products
69
Advanced Recording Operations
You can make a recording with a stop-motion animated effect using frame recording.
To create this effect, alternately move the subject a little and make a frame recording.
We recommend that you use a tripod, and operate the camcorder using the Remote
Commander after step 4.
(1) In standby, press FN to display PAGE1.
(2) Press MENU, then set FRAME REC to ON in
(p. 186).
(3) Press EXIT to return to FN.
The FRAME REC indicator lights up.
(4) Press START/STOP to start frame recording. The camcorder makes a
recording for about six frames, and returns to standby.
(5) Move the subject, and repeat step 4.
To cancel frame recording
Perform either of the following:
–Set FRAME REC to OFF in the menu settings.
–Set the POWER switch to other than CAMERA.
Notes
•The proper remaining tape time is not indicated if you use this function continuously.
•You cannot do frame recording during MPEG movie recording.
When using the frame recording function
The last recorded frame is longer than other frames.
Frame by frame recording
– Frame recording
1
FN
2
CAMERA SET
D ZOOM
PHOTO REC
16 : 9WIDE
STEADYSHOT
FRAME REC
INT. REC
EDITSEARCH
EXIT
RET.
EXEC
OFF
ON