Filter
Top Products
54
(1) To fade in [a]
In standby, press FN to display PAGE1.
To fade out [b]
In recording, press FN to display PAGE1.
(2) Press FADER. The screen to select the fader mode appears.
(3) Select a desired mode.
(4) Press
OK to return to PAGE1, and press EXIT to return to FN.
The fader indicator you selected flashes.
(5) Press START/STOP. After the fade in/out is carried out, your camcorder
automatically returns to the normal mode.
To cancel the fader function
Before pressing START/STOP, press OFF to return to PAGE1 and press EXIT to
return to FN.
Note
You cannot use the following functions while using the fader function. Also, you cannot
use the fader function while using the following functions:
– Digital effect
– Super NightShot
– Color Slow Shutter
– Tape photo recording
– Recording on a “Memory Stick” in tape recording or tape recording standby
– Interval recording
– Frame recording
When you select OVERLAP, WIPE or DOT
Your camcorder automatically stores the image stored on a tape. As the image is being
stored, the playback picture disappears. At this stage, the picture may not be recorded
clearly, depending on the tape condition.
Using the fader function
1
FN
FADER
MOSC.
FADER
NORM.
FADER
OFF OK
MONO–
TONE
BOUN–
CE
DOTW
I
PE
OVER–
LAP
2~4
FADER