Filter
Top Products
25
Recording
– Basics
Notes
•Fasten the grip strap firmly.
•Do not touch the built-in microphone during recording.
•The recording data (date/time or various settings when recorded) are not displayed
during recording. However, they are recorded automatically onto the tape. To display
the recording data, press DATA CODE during playback. You can also use the Remote
Commander for this operation (p. 39).
Note on Recording mode
Your camcorder records and plays back in the SP (standard play) mode and in the LP
(long play) mode. Select SP or LP in the menu settings (p. 190). In the LP mode, you can
record 1.5 times as long as in the SP mode.
When you record a tape in the LP mode on your camcorder, we recommend playing the
tape on your camcorder.
Note on the LOCK switch
When you slide the LOCK switch to the left, the POWER switch can no longer be set to
MEMORY accidentally. The LOCK switch is set to the right as a default setting.
To enable smooth transition
Transition between the last scene you recorded and the next scene is smooth as long as
you do not eject the cassette even if you turn off your camcorder.
However, check the following:
–Do not mix recordings in the SP mode and in the LP mode on one tape.
–When you change the battery pack, set the POWER switch to OFF (CHARGE).
–When you use a tape with cassette memory, you can make the transition smooth even
after ejecting the cassette by using the END SEARCH function (p. 36).
If you leave your camcorder in tape recording standby for five minutes while the
cassette is inserted
Your camcorder automatically turns off. This is to save battery power and to prevent
battery and tape wear. To resume tape recording standby, set the POWER switch to
OFF (CHARGE), and to CAMERA again. To start recording, press START/STOP again
without switching the POWER switch. However, your camcorder does not turn off
automatically while the cassette is not inserted.
When you record in the SP and LP modes on one tape or you record in the LP
mode
•The transition between scenes is not smooth.
•The playback picture may be distorted or the time code may not be written properly
between scenes.
The battery life when you record using the LCD screen
The battery time is slightly shorter than the shooting time using the viewfinder.
Recording a picture