Filter
Top Products
ZebraNet Utilities
ZebraNet Alert
120
45537L-005 ZebraNet PrintServer II User Guide 04/21/2009
ZebraNet Alert Destinations
Unsolicited Alert messages can be directed to the following destinations:
•Email (
PSII-specific)
• Serial (ZebraLink-specific)
• Parallel (ZebraLink-specific)
•TCP (
PSII-specific)
• UDP (ZebraLink-specific)
•SNMP (
PSII-specific)
ZebraNet Alert Using SNMP
You can send notifications over SNMP only, for use with ZebraNet Alert or a similar network
management utility.
To configure the PSII to send alerts across a TCP/IP Network to ZebraNet Alert,
complete these steps:
1. From the task bar, select Start>Programs>ZebraNet Utilities>ZebraNet View.
2. Select the printer you want.
• If a DHCP server is present, the PSII will already have an IP address.
• If no DHCP server is present, you might need to assign the printer an IP address.
3. To assign your printer an IP address, from the menu bar, select Print
Server>Configuration
.
4. For PrintServer SNMP Traps, select the SNMP Traps tab.
5. Enter the trap destination and options.
This tells the
PSII what TCP/IP address to send the alerts to, and under what
circumstances to send error and log reports. Entering 255.255.255.255 broadcasts the
message to every host on the network with an SNMP program running.
Important • If you did not install ZebraNet Alert during the ZebraNet Utilities installation,
see ZebraNet Utilities on page 37.