Filter
Top Products
33
Installation
Internal PSII
04/21/2009 ZebraNet PrintServer II User Guide 45537L-005
6. See Figure 9. To remove the electronics cover, push in and pull up.
Figure 9 • Z4Mplus Electronics Cover
7. From the back of the printer, use a flat-blade screwdriver to remove the screws and the
cover plate.
This opens the mounting slot on the back of the printer.
8. See Figure 10. To disconnect the PSII, unplug the cable connector from the I/O board.
You will have the I/O board separate from the PSII board (and the cable connected to it).
1
Cover plate screws (2)
2
Printer back
3
Cover plate
2
3
1