Filter
Top Products
PrintServer II
PSII Features
90
45537L-005 ZebraNet PrintServer II User Guide 04/21/2009
5. In the Print Server Configuration page, you have a menu to choose from. The table that
follows identifies what each menu option page looks like:
Enabled Protocols
Modifies the protocols to be used. NetWare, HP
JetAdmin, or both.
Enabling HP JetAdmin Support allows status
from the Zebra device to display in Hewlett-
Packard’s HP JetAdmin utility.
Netware
Preferred Tree — Enter the tree that the printer is
in.
Print Server Name — Enter the name of the
printer.
Disable NetWare SAP — Enables or disables the
broadcast SAP (Service Advertising Protocol)
messages. Typically, SAP is enabled. If SAPs are
disabled, the print server does not appear in the
bindery and is not discovered by ZebraNet View.
Disabling SAPs reduces network traffic,
however, SAPs should be disabled, only on
networks using NDPS exclusively or NetWare 5
over the IP protocol.
NetWare Frame Format — You can select how
the frames for the data packets are assembled.
The default is Automatic Sensing.
For details, see Help.