Filter
Top Products
Getting Started
Assigning an IP Address
46
45537L-005 ZebraNet PrintServer II User Guide 04/21/2009
Assigning an IP Address
Before you can begin working with PSII, you must get or assign an IP address for the PSII
device.
With Dynamic Host Configuration Protocol (DHCP)
If your network uses DHCP, your PSII device is assigned a temporary IP address. This is
important to know, because you have the option to make the temporary IP address the
permanent IP address.
Without DHCP
If your network does not use a dynamic IP addressing system (such as DHCP), you need to set
a permanent IP address of the
PSII device.
ZebraNet View
ZebraNet View is the Windows-based print server management and configuration utility that
came with your
PSII.
Important • Throughout the procedure in this chapter, there are some features that require
the default User ID and/or default password. If you are prompted, these are the defaults:
• User ID: admin
• Password: 1234
Note • Check with your Network Administrator to see whether your network uses DHCP.
Important • The remaining sections are dependent on the successful installation of ZebraNet
Utilities, which you should have completed on page 37.