Filter
Top Products
Getting Started
Defaulting the PSII
72
45537L-005 ZebraNet PrintServer II User Guide 04/21/2009
Test Button
To default the PSII to factory settings using the Test button, complete these
steps:
1. The printer is turned off (O).
The
Test button is a small hole on the bottom of the external PSII device. To press the
Test button, you need to insert something small into the hole, like a paperclip.
2. With the printer turned off, press and hold the Test button on the PSII device and turn on
the printer.
3. The status indicator tells you when PSII has been reset to factory defaults, as follows:
• If an active network cable is connected to the PSII, the status indicator turns solid
green. When this happens, you can release the
Test button.
• If there is not an active network cable connected to the
PSII, the status indicator
flashes green. When this happens, you can release the
Test button.
• For more details on status indicators, see Status Indicator on page 130.