Filter
Top Products
Menu Options
140
[Camera Settings]: Resets the white balance, iris, ISO speed, gain, shutter speed, [~ Camera Setup]
settings and custom picture settings to default settings.
[Assignable Buttons]: Resets the assignable buttons to default settings.
[Tally Lamp]: Allows you to set whether the front and rear tally lamps illuminate while the camcorder is recording.
[Media Access LED]: Allows you to set whether the respective SD card access indicator illuminates while the
camcorder is accessing an SD card.
[Delete Last Clip]: Deletes the last clip you recorded. This menu option will not be available if you turned the
camcorder off since recording the last clip.
[HDMI] settings
[Time Code]: Allows you to output the internal camcorder-generated time code through the HDMI OUT
terminal. The setting cannot be changed while the camcorder is connected to an external device using an
HDMI cable (commercially available).
[Rec Command]: After selecting to output the time code, this setting allows you to additionally output also the
camcorder’s recording command. When you connect the camcorder to another recording device using the
HDMI OUT terminal, if you start or stop recording with the camcorder, the other device will also start or stop
recording. The setting cannot be changed while the camcorder is connected to an external device using an
HDMI cable (commercially available).
[Reset Hour Meter]: The camcorder has two “hour meters” – the first keeps track of total operation time and the
second keeps track of operation time since the last time the second hour meter was reset with this function.
[Firmware]: You can verify the current version of the camcorder’s firmware. This menu option is usually unavailable.
[ My Menu] ( mode only)
Menu item Submenu Setting options A
[Edit] [Register] [Cancel], [OK] 28
[Move] [Cancel], [OK]
[Delete] [Cancel], [OK]
[Reset All] [Cancel], [OK]
COPY