Filter
Top Products
Recording Audio
76
Configuring the Built-in Microphone’s Low-Cut Filter
1 Open the [Int. Mic Low Cut] submenu.
[¡ Audio Setup] > [Audio Input] > [Int. Mic Low Cut]
2 Select the desired option and then press the joystick.
Options
Selecting the Built-in Microphone’s Sensitivity
1 Open the [Int. Mic Sensitivity] submenu.
[¡ Audio Setup] > [Audio Input] > [Int. Mic Sensitivity]
2 Select the desired option and then press the joystick.
Options
Activating the Microphone Attenuator
If the audio level is too high and the sound sounds distorted when
recording with the built-in microphone or an external microphone
connected to the MIC terminal, activate the microphone attenuator (built-
in microphone: 12 dB, external microphone (MIC terminal): 20 dB).
1 Open the [MIC/Int. Mic Att.] submenu.
[¡ Audio Setup] > [Audio Input] > [MIC/Int. Mic Att.]
2 Select [On] and then press the joystick.
[Off]: For recording audio under usual conditions.
[LC1]: For recording mainly people’s voices.
[LC2]: For reducing the background sound of wind when recording
outdoors in windy surroundings (for example, on a beach or close to
buildings). Note that when you use this setting some low-frequency
sounds may be suppressed along with the sound of wind.
[Normal]: For recording audio under usual conditions.
[High]: For recording audio at a higher volume (+6 dB).
[¡ Audio Setup]
[
Audio Input]
[Int. Mic Low Cut]
[Off]
[¡ Audio Setup]
[
Audio Input]
[Int. Mic Sensitivity]
[Normal]
[¡ Audio Setup]
[Audio Input]
[MIC/Int. Mic Att.]
[Off]
COPY