Canon 7428B007 Camcorder User Manual


 
Preparing the Power Supply
22
Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day
before, to ensure a full charge.
We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.
To charge the battery pack, disconnect the DC cable from the compact power adapter.
Attaching the Battery Pack
1Set the Q switch to OFF.
2 Insert the battery pack all the way into the compartment as shown
in the illustration and press it gently toward the left until it clicks.
Removing the Battery Pack
1Set the Q switch to OFF.
2 Push the BATTERY RELEASE latch in the direction of the arrow.
While holding it down, slide the battery pack toward the right and
then pull it out.
COPY