Canon 7428B007 Camcorder User Manual


 
83
Reviewing a Recording
Reviewing a Recording
When the camcorder is in mode, you can review the last clip that
was recorded.
1 Open the [Rec Review] submenu to set the review length.
[w Other Functions] > [Rec Review]
2 Select the desired option and then press the joystick.
3 After you finish recording, press the
u button.
The last clip that was recorded is played back without audio for the
selected duration. [Ð REVIEW] appears at the top of the screen.
Press the CANCEL button to stop reviewing the clip and change the
camcorder back to record pause mode.
After the clip finishes playing back, the camcorder returns to record
pause mode.
Options
NOTES
When pre-recording mode is activated (A 84), you cannot review a clip.
If the camcorder switched SD cards during a recording, the camcorder
will play back the clip on the SD card most recently recorded on.
Operating modes:
[Entire Clip]: Allows you to review the entire clip.
[Last 4 sec]: Allows you to review just the last 4 seconds of the clip.
[w Other Functions]
[Rec Review]
[Entire Clip]
COPY