Canon 8224B001 Digital Camera User Manual


  Open as PDF
of 198
 
1
2
3
4
5
6
7
8
9
10
11
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Using GPS
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
175
Playback
Playback is not possible.
• Imageormovieplaybackmaynotbepossibleifacomputerisusedtorenamelesor
alter the folder structure. Refer to the Software Guide (=
21, 26) for details on
folderstructureandlenames.
Playback stops, or audio skips.
• Switch to a memory card that you have performed low-level formatting on with the
camera (=
153).
• There may be brief interruptions when playing movies copied to memory cards that
have slow read speeds.
• When movies are played on a computer, frames may be dropped and audio may skip
if computer performance is inadequate.
Sound is not played during movies.
• Adjust the volume (=
101) if you have activated [Mute] (=
149) or the sound in
the movie is faint.
• No sound is played for movies shot in [
] mode (=
74) because audio is not
recorded in this mode.
Memory Card
The memory card is not recognized.
• Restart the camera, with the memory card in it (=
14).
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
• Press the <1> button to enter Playback mode. Hold the <n> button down as
you press the <o> and <
m
> buttons at the same time. On the next screen, press
the <q><r> buttons to choose [B], and then press the <m> button.
SX270 HS
Eye-Fi Cards
Cannot transfer images (=
170).
SX280 HS
Wi-Fi
Cannot access the Wi-Fi menu by pressing the <o> button.
• The Wi-Fi menu is not available in Shooting mode. Switch to Playback mode and try
again.
• In Playback mode, the Wi-Fi menu cannot be accessed during detailed information
display,magnieddisplay,orindexdisplay.Switchtosingle-imagedisplayanda
viewing mode other than detailed information display. Similarly, the Wi-Fi menu
cannotbeaccessedduringlteredimagedisplayaccordingtospeciedconditions.
Cancel the playback state of the image in image search mode.
• The Wi-Fi menu cannot be accessed while the camera is connected to a printer,
computer, or TV via a cable. Disconnect the cable.
Cannot add a device/destination.
• A total of 20 items of connection information can be added to the camera. Erase
unneededconnectioninformationfromthecamerarst,andthenaddnewdevices/
destinations (=
145).
• To add Web services to send images to, install CameraWindow and complete the
settings in CameraWindow (=
22).
• Toaddasmartphoneasadevice,rstinstallthededicatedapplication
CameraWindow on your smartphone (=
130).
• Toaddacomputerasadevice,rstinstallthesoftwareCameraWindowonthe
computer. Also check your computer and Wi-Fi environment and settings (=
134,
135).
• Do not use the camera near sources of Wi-Fi signal interference, such as microwave
ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band.
• Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
Cannot send images.
• Thedestinationdevicehasinsufcientstoragespace.Increasethestoragespaceon
the destination device and resend the images.
• The write-protect tab of the memory card in the destination camera is set to the
locked position. Slide the write-protect tab to the unlocked position.
C OPY
 previous next