Filter
Top Products
23
Preparing the Camera
Preparing the Camera
Using the Battery Pack
Use rechargeable Battery Pack NB-4H, which
is bundled with the camera, as the battery
power source. Ensure that the battery pack
has been fully charged before you install it in
the camera.
• Compact Power Adapter CA-PS200 can
be used with power supplies ranging
from 100 to 240 volts.
Charging the Battery Pack
• The battery pack requires approximately 70
minutes to charge fully from a completely
discharged state (as charged with Compact
Power Adapter CA-PS200 according to
standard Canon testing conditions).
■
Charging times will vary with the ambient
temperature and charge state of the
battery pack.
■
To protect and prolong the battery pack
life, do not charge it longer than 24 hours
at a time.
• Do not charge the battery pack in poorly
ventilated areas.
• Remove the power cord from the outlet
when charging is complete or the compact
power adapter is not in use.
• Do not charge batteries other than Battery
Pack NB-4H with the compact power
adapter.
This section describes the procedures required to prepare the camera for use.