Filter
Top Products
25
Preparing the Camera
Installing the Battery Pack
Once the battery pack has been fully charged,
install it in the camera with the following
procedures.
1. Ensure that the mode dial
is set to lock.
2. Slide the battery
cover in the
direction of the
arrow.
3. Insert the battery pack as shown.
4. Close the battery cover.
Battery Pack
NB-4H
• Do not use Battery Pack NB-4H with
products other than the specified
Canon products.
• The battery pack continues to discharge
a minimal portion of its power while
installed in the camera, even with the
camera power off. This will shorten the
battery life.
• Remove the battery pack from the
camera during extended periods of
disuse. Place it into the case provided
and store it in a cool, dry place.
• To remove the battery pack, pull the
eject button in the direction of the
arrow.