Filter
Top Products
258
Trouble?
Memory card is full
- Delete some recordings (A 73) to free some space or replace the
memory card.
Memory card is write-protected
-The LOCK switch on the memory card is set to prevent accidental
erasure. Change the position of the LOCK switch.
Memory card writing error Attempt to recover the data?
-This message will appear the next time you turn on the camcorder
if power supply was accidentally interrupted while the camcorder
was writing to the memory card. Select [Yes] to try to recover the
recordings. If you inserted a memory card that contains scenes
recorded using another device, we recommend that you select
[No].
Need to recover files from the memory card. Change the position
of the LOCK switch on the memory card.
-This message will appear the next time you turn on the camcorder
if power supply was accidentally interrupted while the camcorder
was writing on the memory card and later the position of the card’s
LOCK swi
tch was changed to pre
vent erasure. Change the posi-
tion of the LOCK switch.
No memory card
-Insert a compatible memory card into the camcorder (A 33).
- The memory card may not be inserted correctly. Insert the memory
card all the way into the memory card slot until it clicks.
H Not enough available space
- Delete some recordings on the memory card (A 73).
- Set the video quality to [Long Play] (LP or 4 Mbps) (A 78).