Filter
Top Products
263
Trouble?
Memory card cover is open
- The memory card cover was opened while the memory card was
being accessed. Stop the Wi-Fi function in use and end the Wi-Fi
connection.
Multiple access points detected. Try the operation again.
- There are multiple access points sending out a WPS signal at the
same time. Try the operation again later or perform setup using the
[WPS: PIN Code] or [Search for Access Points] option (A 198).
No access points found
- The access point set in the camcorder could not be found.
- To avoid interference, use the camcorder at some distance from
devices that emit electromagnetic waves (cordless phones, micro-
wave ovens, etc.).
-Make sure that you use the access point’s SSID for the cam-
corder’s Wi-Fi settings (A 201).
- If the access po
int is using MAC addr
ess filtering, enter the cam-
corder’s MAC address in the access point’s configuration screen.
The access point is not compatible with UPnP
- An access point compatible with UPnP (Universal Plug and Play)
was not found in the connected network. You must use an access
point compatible with UPnP. If your access point is compatible,
make sure UPnP is activated.
Unable to access configuration files
- Turn off the camcorder. After a short while, turn it on again. If the
problem persists contact a Canon Service Center.