Filter
Top Products
54
Basic Recording
• By default, the camcorder’s shooting mode is set to N
(A 57). You can select a different shooting mode according to
the shooting conditions (A 82).
2 Slide the lens cover switch down.
3 Press Y to begin recording.
•Press Y again to stop recording. The scene will be
recorded to the memory.
• The ACCESS indicator will flash from time to time while the
scene is being recorded.
When you have finished recording
1 Make sure that the ACCESS indicator is off.
2 Close the LCD panel or press [ to turn off the cam-
corder.
3 Slide the lens cover switch up.
• To protect the lens, keep the lens cover closed when you are
not recording.
•Be sure to save your recordings regularly (A 149), especially
after making important recordings. Canon shall not be liable
for any loss or corruption of data.