Filter
Top Products
3-20
Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
OL-19609-04
Chapter 3 Configuring and Managing the IP Camera
Network Setup Windows
Discovery Settings Window
The Discovery Settings window provides options for configuring the IP camera to work with Cisco
Discovery Protocol or Bonjour. These applications facilitate monitoring and management of your
network.
To display the Discovery window, access the configuration windows as described in the “Performing the
Initial Setup of the IP Camera” section on page 2-5, click Network Setup, then click Discovery.
If you change any options in this window, you must click the Save Settings button to save the changes.
If you do not click this button, changes are not retained when you exit the window. Save Settings
appears at the bottom of the window. You may need to scroll down to it.
Table 3-12 describes the options in the Discovery Settings window.
NTP Server Settings Area
Note These options do not apply if you choose the Manually Configure Time option.
Primary NTP Server If you configured the IP camera to obtain its time from an NTP server,
identify the primary NTP server by choosing IP Address or Hostname from
the drop-down list and entering the IP address or host name in the
corresponding field.
Primary NTP Server
Port
If you configured the IP camera to obtain its time from an NTP server, enter
the primary NTP server port number.
Valid values are 123 and 1024 through 65535. The default port is 123.
Secondary NTP Server If you configured the IP camera to obtain its time from an NTP server,
identify the secondary NTP server by choosing IP Address or Hostname
from the drop-down list and entering the IP address or host name in the
corresponding field.
Secondary NTP Server
Port
If you configured the IP camera to obtain its time from an NTP server, enter
the optional secondary NTP server port number.
Valid values are 123 and 1024 through 65535. The default port is 123.
Table 3-11 Time Settings Window Options (continued)
Option Description
Table 3-12 Discovery Settings Window Options
Option Description
Cisco Discovery Protocol (CDP) Area
Enable CDP Check this check box if CDP is enabled in your network and you want the
IP camera to broadcast CDP discovery messages.
Show Neighbors button Displays a new window with information about CDP-enabled device
neighbors in your network.
Bonjour Area
Enable Bonjour Check this check box if Bonjour is enabled in your network and you want the
IP camera to broadcast Bonjour discovery messages.