Filter
Top Products
iDP3221 User’s Manual
90
CITIZEN
GS I n
[Function] Sending the printer ID
[Code] <1D>H<49>H<n>
[Range] 0 ≤ n ≤ 3
49 ≤ n ≤ 51
[Outline] Sends the specified printer ID.
"n" means the following.
n
Type of printer ID Specification Value (hex)
1,49
Model ID
iDP3221 20
2,50
Type ID See table below "Type ID"
3,51
ROM version ID As per ROM version
Type ID
Bit
Meaning
Hex. Decimal
0
Equipped for 2-byte code support
01 1
1
Equipped with autocutter
02 2
2
Undefined
——
3
Undefined
——
4
Unused
00 0
5
Undefined
——
6
Undefined
——
7
Unused
00 0
[Caution] • Under DTR/DSR control, the printer sends the printer ID after verifying that the host is
ready to receive. If the host is not ready to receive, the printer waits for the host to
become ready to receive.
• Under XON/OFF control, the printer sends the printer ID without checking whether the
host is ready to receive or busy.
• Because this command is executed when data is mapped in the receive buffer, there may be
a delay between command receiving and printer ID sending depending on the condition of
the receive buffer.
• If ASB (automatic status back) is enabled by GS a, the host must discriminate between the
printer ID due to this command and the status due to ASB.