Filter
Top Products
iDP3221 User’s Manual
18
CITIZEN
4.9 Operation Panel and Display of Error
1. POWER lamp (Green)
Illuminated if the power is turned on. Also, flashes to indicate a memory error.
2. ERROR lamp (Red)
Indicates an error by illuminating or blinking the lamps.
Error POWER Lamp ERROR Lamp Reset
Memory check error
Quick blinking
ON Cannot be reset
Cover open ON ON Close the cover.
Head overheat ON
Automatically reset by a
temperature drop
Paper near end ON ON
Set a new paper roll after a print
stop.
Paper end ON ON Set a new paper roll.
Cutter motor lock ON
Quick + Slow
blinking
Eliminate a paper jam.
Macro execution wait ON
Slow blinking
Press the FEED switch.
<Error Details>
Cover open ----- Opening of the printer cover is detected by the printer cover open sensor. The
ERROR lamp is then lit and print operation is halted. Note that the DIP switch
may be set to allow paper feed while the printer cover is open.
Head overheat ----- If the temperature of the printing head rises (about 65°C or more), in order to protect
it against overheating, a printing head temperature sensor will be activated to stop
printing. If the temperature drops (about 60°C), printing will be automatically
resumed.
Paper near end ----- When the paper roll reaches a set diameter, the ERROR lamp is lit by the paper near
end sensor located on the side of the roller part of the upper cover. (See the
function of the control codes ESC c3 and ESC c4 in "PRINT CONTROL
FUNCTION.")
Paper end ----- When the paper roll runs out, the paper sensor located in the paper path near the
printing head detects paper end and the ERROR lamp is lit, resulting in halting
printing. (See the function of the control codes ESC c3 and ESC c4 in "PRINT
CONTROL FUNCTION.") When paper is inserted into the paper path, loading of
the paper roll begins.