Filter
Top Products
iDP3221 User’s Manual
75
CITIZEN
ESC c 5 n
[Function] Enabling/Disabling the panel switches
[Code] <1B> H <63> H <35> H <n>
[Range] 0 ≤ n ≤ 255
[Outline] Selecting the FEED switch valid/invalid.
• "n" is valid only in the lowest bit (n0).
• "n" bit means the followings.
n0 Condition
0 FEED switch valid.
1 FEED switch invalid.
[Caution] When the panel switch is disabled with this command, the FEED switch is disabled.
Therefore, the paper cannot be fed by operating the FEED switch.
[Default] n = 0
[Sample Program]
LPRINT CHR$ (&H1B) ; "c5" ; CHR$ (0) ; ••••••• When enabling the FEED switch
LPRINT CHR$ (&H1B) ; "c5" ; CHR$ (1) ; ••••••• When disabling the FEED switch
ESC d n
[Function] Printing and feeding the paper by n lines
[Code] <1B> H <64> H <n>
[Range] 0 ≤ n ≤ 255
[Outline] Prints data in the buffer and feeds paper by "n" lines.
• Specified line does not remain.
• The beginning of the line is to be considered as the next printing start position.
[Caution] If [n × line feed width] exceeds approximately 1016 mm, this command feeds paper by
approximately 1016 mm (40 inches).
[Default] The initial value is not defined.
[Sample Program]
LPRINT "AAAAA"
LPRINT CHR$ (&H1B) ; "d" ; CHR$ (2) ;
LPRINT "AAAAA" ; CHR$ (&HA) ;
END
[Print Results]