Filter
Top Products
iDP3221 User’s Manual
5
CITIZEN
2.3 Paper Specifications
2.3.1 Recommended Paper
• Type : Thermal paper
• Paper width : 80 + 0/- 1 mm
• Paper thickness : 60∼75µm
• Roll diameter : φ83 mm or less
• Printing surface : Outside of the roll (Surface)
• Recommended paper : TF50KS-E2C (Monochrome) made by NIPPON SEISHI or its equivalent
•Core :φ12 mm (Inner diameter), φ18 mm (Outer diameter)
CAUTION:
• Use of non-specified paper may cause irregularity of print density. If this is the case, use the DIP switch
to select print density. (See 5. DIP SWITCH SETTING)
• Do not paste the paper to the core.
• If the paper comes in contact with a chemical or oil, it may discolor or lose a record.
• Do not rub the paper surface strongly with a nail or hard metal. It may discolor.
•. Discoloring starts at about 70°C. Watch out for effects of heat, humidity, light, and so on.
2.3.2 Printing Position
Pa
p
er Width: 80 mm
Printing Area: 72.2 mm
About 3.9 mmAbout 3.9 mm