Filter
Top Products
iDP3221 User’s Manual
64
CITIZEN
ESC J n
[Function] Printing and feeding paper in minimum pitch
[Code] <1B> H <4A> H <n>
[Range] 0 ≤ n ≤ 255
[Outline] Prints the data held in the print buffer and feeds paper by n/360 inches. The beginning of
the line is taken as the start position for the next print.
[Caution] The line feed width can be set separately for the Standard and Page modes.
This command does not affect the line feed width defined by ESC 2 or ESC 3.
The basic calculation pitch is set by GS P.
Fractions resulting from calculation are corrected with the minimum pitch of the mechanism,
and the remainder is omitted.
In Standard mode, this command uses the vertical (paper feed direction) basic calculation
pitch (y).
In Page mode, this command acts differently depending on the start point:
(1) If the start point specified by ESC T is top left or bottom right, the command uses the
vertical (paper feed direction) basic calculation pitch (y).
(2) If the start point specified by ESC T is top right or bottom left, the command uses the
horizontal (perpendicular to the paper feed direction) basic calculation pitch (x).
The maximum settable line feed width is 1016 mm (40 inches). A setting greater than
this maximum is trimmed to the maximum. The beginning of the line is taken as the
start position for the next print.
[Default] Undefined
[Sample Program] [Print Results]
See Sample Program and Print Results for ESC 2 on page 57.