Filter
Top Products
iDP3221 User’s Manual
67
CITIZEN
ESC S
[Function] Selecting Standard mode
[Code] <1B>H<53>H<n>
[Outline] Switches from Page mode to Standard mode.
[Caution] • This command is only effective if it is entered when in Page mode.
• Any data mapped in Page mode is erased.
• After this command is executed, the beginning of the line is taken as the start position for
the next print command.
• The print area defined by ESC W is initialized.
• The commands listed below, which have separate settings for Standard mode and Page
mode, are changed to the settings for Standard mode use.
(1) Spacing setting: ESC SP
(2) Line feed width setting: ESC 2, ESC 3
• Standard mode is selected when the printer is turned on or when ESC @ is executed.
[See Also] FF, ESC FF, ESC L