Filter
Top Products
iDP3221 User’s Manual
81
CITIZEN
GS ! n
[Function] Specifying the character size
[Code] <1D>H<21>H<n>
[Range] 0 ≤ n ≤ 255, where:
1 ≤ vertical magnification ≤ 8, and 1 ≤ horizontal magnification ≤ 8
[Outline] Specifies the character size (vertical and horizontal magnification).
Valu e
Bit
Meaning
Hex. Number Decimal Number
0
1
2
3
Vertical magnification
specification
See Table 2, "Vertical Magnification"
4
5
6
7
Horizontal magnification
specification
See Table 1, "Horizontal Magnification"
Table 1 Horizontal Magnification Table 2 Vertical Magnification
Hex. Decimal
Magnification
Hex. Decimal
Magnification
00 0
1×(standard)
00 0
1×(standard)
10 16
2×(horizontal
double)
01 1
2×(vertical
double)
20 32
3×
02 2
3×
30 48
4×
03 3
4×
40 64
5×
04 4
5×
50 80
6×
05 5
6×
60 96
7×
06 6
7×
70 112
8×
07 7
8×
[Caution] • This command works for all alphanumeric characters except for HRI characters.
• This command is ignored if either the vertical magnification or horizontal magnification is
out of range.
• In Standard mode, the vertical direction is defined as the paper feed direction, and the
horizontal direction is defined as the direction perpendicular to the paper feed. These
definitions are, therefore, interchanged when 90°-right-turned characters are specified.
• In Page mode, the vertical direction means the top-bottom direction of each character.
The horizontal direction means the side-to-side direction of each character.