Filter
Top Products
iDP3221 User’s Manual
65
CITIZEN
ESC L
[Function] Selecting Page mode
[Code] <1B>H<4C>H<n>
[Outline] Switches from Standard mode to Page mode.
[Caution] • This command is only effective if it entered at the beginning of a line.
• This command is not effective if it is entered when in Page mode.
• Standard mode is restored when printing specified by FF is finished or when ESC S is
issued.
• The character mapping start position will be the point specified by ESC T in the print area
specified by ESC W.
• The commands listed below, which have separate settings for Page mode and Standard
mode, are changed to the settings for Page mode use.
(1) Spacing setting: ESC SP
(2) Line feed width setting: ESC 2, ESC 3
• In Page mode, the following commands can only be set.
(1) ESC V Specifying/changing to 90°-right-turned characters.
(2) ESC a Aligning the characters.
(3) ESC { Specifying/canceling the inverted characters.
(4) GS L Setting the left margin.
(5) GW W Setting the print area width.
ESC @ restores Standard mode.
[See Also] "Page Mode" in Appendix 1
FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS S, GS ¥