Filter
Top Products
iDP3221 User’s Manual
12
CITIZEN
Concave Part
Upper Cover
4.4.2 Manually Inserting the Paper
The manual insertion is effective when DIP switch DS1-2 is set to ON to disable the cover open detection.
1. Turn on the power.
2. Put your hands in the concave parts on both sides of the printer cover, and open it until it comes
to a stop.
3. Cut the end of the paper roll at close to a right angle.
4. Ensure that the paper roll is placed correct side up in the roller part in the upper cover.
5. Insert the end of paper roll straight between the platen roller and the printing head.
6. The paper is automatically pulled into the platen roller and fed to the auto cutter (and comes out
of the paper outlet of the cutter a little).
7. When the printer cover is closed, the paper is fed in a few more lines, cut, and printing is then
possible. Remove cut paper before printing.