Filter
Top Products
iDP3221 User’s Manual
9
CITIZEN
Drawer Kick-Out Connector
Grounding Cable
Drawer Kick-Out Cable Connector
4.2 Connecting Interface Cable
1. Turn off the power. (Mating side included)
2. Check the top and bottom of cable terminals, and connect to the interface connector.
3. Fix the cable terminals. Serial interface : Tighten screws, to fix it.
Parallel interface : Turn clamps, to fix it.
4. Connect the cable to the host computer.
4.3 Connecting the Drawer Kick-Out Connector
1. Turn off the power.
2. Check the top and bottom of the drawer kick-out cable connector and connect it to the drawer kick-out
connector located on the back of the printer.
3. Screw the grounding cable of the drawer to the grounding terminal of the printer.
CAUTION:
• Connect only the prescribed drawer (Solenoid) to the drawer kick-out connector.
(Do not connect a telephone line.)
Parallel Interface Cable
Parallel Interface Connector
Clamp
Serial Interface Cable
Serial Interface Connector