Filter
Top Products
13
Recording Menu Controls
SIMPLE RECORDING
Simple Recording allows you to easily set
recording parameters for each camera
using the Time Interval bar.
• RECORD QUALITY - Set from Normal,
Fine, High, and Highest.
• RECORD SIZE - Sets the video capture
size for each camera to 352x240,
704x240 or 704x480.
NOTE: As you change the Record Size,
FPS also changes to best match the record
size. However, you can change FPS to
your own setting as desired.
• FPS - Sets the Frames Per Second for
recording for each channel. Each
channel can be set to 1, 2, 3, 7, 15 or
30 Frames per second (real time video
capture) from a shared pool of 240 FPS.
Select the time grid and press the ENTER
button. Check the boxes for the following:
• Continuous - The system constantly
records the camera based on the hourly
setting.
• Motion - Only starts the recording if
motion is detected in the selected time
interval.. Select OK and press the
ENTER button.
• Alarm - The system only records if an
alarm or sensor is triggered.
Select OK and press the ENTER button to
save your settings and close the Camera
Settings window. From the Record Setup
window, select APPLY and press the
ENTER button to save your settings.