Filter
Top Products
16
Recording Menu Controls
MANUAL RECORDING
Use Manual Recording to customize
recording size, FPS, image quality, and
audio for each camera. You can also set
Panic Recording Time.
Parameters for each camera are set by
hour using the Time Interval bar.
Press the ENTER key to select the Interval
Bar, and navigate using the arrow keys.
Select an Hour (highlighted in Green), and
press ENTER again to open the Camera
Settings for the selected hour.
• SIZE - Sets the video capture size for
each camera to 352x240, 704x240 or
704x480.
• FPS - Sets the Frames Per Second for recording for each channel. Each channel can be set
to 1, 2, 3, 7, 15 or 30 Frames per second (real time video capture) from a shared pool of 240
FPS. This is reflected in the Frame Remaining bar below Panic Recording Time.
• Quality - Sets the video recording quality to Low, Standard, High or Highest.
• Audio - The Audio Recording Settings work differently on the 4 CH and 8/16 CH Models:
• 4CH Model: Select Audio channel 1~4 for each camera.
• MANUAL RECORDING TIME - Set the amount of time for the system to record in manual
(Panic) Mode from 5~60 minutes.
Select the APPLY button to save your settings, or select UNDO to cancel without saving.