Filter
Top Products
59
Appendix 9: System Setup Tips
3. Select the DATE AND TIME Menu. Change the settings by navigating with the UP/
DOWN/LEFT and RIGHT arrow keys. Set the following based on your local Time (and
Timezone), and set the current date for the
system.
• Date/Time - Sets the current system Date
and Time.*
• Date Format - Sets the Date Display
format (MM-DD-YYYY, YYYY-MM-DD,
etc.).
• Time Format - Sets the Time Display
format to either 12 or 24 hour display.
• Network Time Server Setup -
Synchronizes the system to the specified
remote time server. Select the SYNC
button to connect to the remote server and
synchronize the time. (may also use a time
server of the users choice).
• Timezone Setup - Selections for the local Time Zone (i.e. EST, CST, PST). The DST
(Daylight Savings Time) can be set to ON/OFF.
* NOTE: If the Date/Time is set into the past, a message will appear warning that
Overlapped date(s) will be erased.
** MAKE SURE THAT THE DATE AND TIME ARE SET PRIOR TO RECORDING! **