Filter
Top Products
5.2 Troubleshooting Checklist
ScanSnap fi-5110EOX Operator's Guide 89
Troubleshooting
5
Scanned images are
not displayed on the
screen (when"Allow
automatic blank page
removal" is enabled).
When "Allow automatic
blank page removal" is
enabled, almost blank doc-
uments with only a few
characters may be acci-
dentally recognized as
blank pages and removed
from scanned image data.
Right click "ScanSnap Manager" icon on the
task tray, select [Setting...] - [Scanning] tab
and click the [Option...] button. Then unmark
the "Allow automatic blank page removal"
check box.
Scanned images are
skewed (when "Allow
automatic image
deskew" is enabled).
Are the documents fed into
the ADF with a skew of +-5
degrees?
The "Allow automatic image deskew" function
can correct skewed images upto +-5 degrees.
Load the document onto the scanner so that
the document skew does not exceed this limit.
Depending on the contents
of document, the automatic
image deskew may not work
properly.
Refer to " Allow automatic image deskew."
(page 44)
Scanned images are
skewed (when "Allow
automatic image rota-
tion" is enabled).
Depending on the contents
of document, the automatic
image rotation may not work
properly.
Refer to " Allow automatic image rotation."
(page 45)
(*1): To confirm whether the scanner is connected with USB1.1 or USB2.0, right-click ScanSnap icon on
the task and select [Help] - [About ScanSnap Manager], then click [Detail] button on [Version Informa-
tion] window. [USB type] is displayed in [Scanner information].
Note) "Double-feed" is a phenomenon where two or more sheets are fed into the scanner in a single
operation.
* Visit our Web site for your reference. Other useful information will be posted on the FAQ corner at the
following Web site.
http://scansnap.fujitsu.com
Symptom Check This Item Remedy