Filter
Top Products
xiv
Protect the scanner from static electricity.
Do not use aerosol sprays near the scanner.
Avoid any contact when scanner is in use.
Disconnect the power plug from the power outlet when the
scanner is not used for a long period of time.
Do not install the scanner in the direct sunlight.
Do not use the scanner immediately after moving it from a cold
place into a warm room.
Install the scanner away from strong magnetic fields and other sources of
electronic noise. Also, protect the scanner from static electricity as this might
cause the scanner to malfunction.
Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt and
dust to enter the scanner, resulting scanner failure and malfunction.
Avoid touching any scanner mechanism when scanning as this may cause
injuries.
When the scanner is not used for a long period of time, be sure to disconnect the
power plug from the power outlet for safety.
Do not install the scanner in the direct sunlight or near heating apparatus. Doing
so might cause excessive heat to build up inside the scanner, causing fire or
scanner trouble. Install the scanner in a well-ventilated location.
Do not use the device immediately after moving it from a cold place into a cold
room. This may cause condensation, which might lead to scanning errors. Let the
device dry about one or two hours before you use it.