Filter
Top Products
152
Additional Information
DVD error has
occurred.
Please keep DVD
inside and set power
switch to “DVD”.
This message appears if a disc error has occurred during
dubbing.
Leave the disc inserted and turn the power off. Connect
the AC adapter/charger to the camcorder and set the
power switch to “DVD”. The video file will be repaired.
26, 38
DVD error has
occurred.
Unfinalizing is not
complete.
This message will appear when a disc error occurs during
the unfinalization process. Replace the disc.
121
DVD full. Cannot
execute.
This message will appear if the capacity of the scene
selected is larger than the free space on the disc. Select
another scene, or use another DVD.
80
DVD must be
finalized before it
can be played back
on DVD player or
DVD recorder.
• This message will appear if you remove a DVD-RW
(VF mode)/DVD-R disc that has not been finalized.
• See *5 on p.156. 118
Drive overheat.
Please retry later.
The temperature inside the camcorder is too high. In this
case, proper writing/reading HDD/DVD may not be
possible. Turn off the power, then wait for a while.
—
DVD-R* cannot dub
the scene recorded in
STD mode and 16:9.
With a DVD-RW (VF mode)/DVD-R/+RW disc, video
cannot be recorded with a combination of movie quality
“STD” and 16:9 mode “On”. Use a DVD-RAM or DVD-
RW (VR mode) disc for dubbing.
* “DVD-RW (VF)” will appear when using a DVD-RW
(VF mode) disc, and “+RW” will appear when using a
+RW disc.
76
DVD-R*, Different
video mode, 16:9
and 4:3 mode cannot
exist together.
With a DVD-RW (VF mode)/DVD-R disc, the movie
quality mode and 16:9 mode cannot be changed in the
middle of a disc. Change the movie to be dubbed or
replace the disc with a DVD-RAM/DVD-RW (VR
mode)/+RW disc.
* “DVD-RW (VF)” will appear when using a DVD-RW
(VF mode) disc.
77
DVD-R*, 16:9 mode
cannot be changed,
when Video mode is
STD.
With DVD-RW (VF mode)/DVD-R/+RW discs, the
setting of 16:9 mode is not possible when the Video mode
is STD.
* “DVD-RW (VF)” will appear when using a DVD-RW
(VF mode) disc, and “+RW” will appear when using a
+RW disc.
76
DVD-R*, Input
Source cannot be
changed.
Once a DVD-RW (VF mode)/DVD-R has been recorded
in 16:9 mode, the input source cannot be changed.
* “DVD-RW (VF)” will appear when using a DVD-RW
(VF mode) disc.
77
Message Cause & Troubleshooting
Reference
page
DZ-HS903-803-US-Ea_IM_v01d05n02.p.book Page 152 Friday, September 12, 2008 8:22 PM