Filter
Top Products
154
Additional Information
HDD error has
occurred. Formatting
is not complete.
Did you interrupt the formatting of the HDD?
Press the RESET button to execute system reset. 172
HDD error has
occurred. Restart.
An HDD error probably occurred during editing of a
video file.
Turn off this camcorder, and then connect the AC
adapter/charger and turn the power switch to “HDD”.
The video file will be repaired.
38
NO DVD This message may appear when the camcorder or disc is
moved from a cold place to a warm place.
Condensation has occurred on the lens or the HDD/DVD
drive. Do not remove the disc; leave the camcorder
turned off in a dry place for 1 – 2 hours.
168
Insert a disc. 34
• The disc is not inserted correctly.
Push the disc against the turntable at the center until a
click is heard.
• See *3 and *4 on p.156.
34
Is the disc inserted upside down?
Insert the disc with the recording side facing inward to
the camcorder body.
11, 34
No more scenes.
PlayList was deleted.
• All scenes were deleted from the playlist.
• If all registered scenes of a playlist are deselected, the
playlist will be deleted and no options can be set.
—
PlayList over limit. The maximum number of playlists is already reached. No
more playlists can be created or copied.
95
Same scenes on Play
List will be deleted.
Delete scenes?
This will appear when scenes to be deleted from a
program on the HDD or disc are linked to a playlist. (This
message will not appear if you deselect the scenes from
the playlist.)
99
Scene No.xxx is too
large. Please divide
this scene before
dubbing.
This message will appear during all scene dubbing if the
data size of the scene to be dubbed is larger than the free
space on one disc (approx. 1.4 GB, approx. 30 minutes in
FINE mode). Divide the scene, and then dub it.
103
Scenes over limit.
Cannot add scenes.
The number of scenes entered in a playlist has reached
the limit that can be entered.
Delete unnecessary scenes.
95, 99
Scenes over limit.
Cannot divide scene.
The number of entered scenes has reached the limit that
can be entered.
Delete unnecessary scenes.
95, 99
Stop processing. The C button was pressed to stop processing of multiple
scenes.
—
Message Cause & Troubleshooting
Reference
page
DZ-HS903-803-US-Ea_IM_v01d05n02.p.book Page 154 Friday, September 12, 2008 8:22 PM