Filter
Top Products
56
Viewing
Capturing a still
picture from a movie
(PHOTO Capture)
You can capture and record an image
displayed during movie playback as a
photo.
The number of photo pixels differs
depending on the mode as follows:
In 16:9 mode: 640 × 360 pixels
In 4:3 mode: 640 × 480 pixels
Press PHOTO/SELECT or
MENU at the frame you want to
capture during movie playback or
playback pause.
• If you press PHOTO/SELECT,
go to step . If you press
MENU, proceed to the next
step.
Select “Edit” by pressing f/e,
then press c.
If “PHOTO Capture” is not selected,
select it by pressing f/e, then
press the confirmation button.
Press d to select “YES”, then press
the confirmation button to confirm.
• To cancel capturing, either press
the confirmation button while
“NO” is selected or press
C.
• After capturing is complete or
canceled, the screen will return
to playback pause.
Playing back scenes
repeatedly
(Repeat Play)
When this function is On, all scenes
will play back from the first scene to
the last scene repeatedly.
If a range of scenes (or just one scene)
is specified (p.49), playback of the
specified scenes will be repeated.
Press MENU on the disc navigation
screen (p.48).
Select “Others” by pressing f/
e, then press c.
Select “Repeat Play” by pressing
f/e, then press c.
Select “On” by pressing f/e,
then press the confirmation button to
confirm the setting.
Press MENU to return to the disc
navigation screen.
Press the confirmation button to
begin playback.
• To quit playback, press
C.
(“Repeat Play” remains “On”.)
• “Repeat Play” will be set to
“Off” if:
– you repeat the steps and
select “Off” instead of “On”
in step
– turn off the power
– remove the DVD
• Repeat playback will not
function when you play the last
scene when the camcorder is in
record pause mode.
HDD RAM -RW (VR) R
-RW (VF)
+RW HDD RAM -RW (VR) R
-RW (VF)
+RW
DZ-HS903-803-US-Ea_IM_v01d05n02.p.book Page 56 Friday, September 12, 2008 8:22 PM