Filter
Top Products
27
* The [Set values] in bold letters are factory defaults.
A Encode Select the encoding from [Single Encode], [Multi Resolution] or [Multi-
Encode].
C options vary depending on the selected encoding system.
[Set values: Single-Encode, Multi-Resolution, Multi-Encode1,
Multi-Encode2]
Single-Encode [Set values: JPEG, H.264 Baseline, H.264 High]
Multi-Resolution [Set values: JPEG, H.264 Baseline, H.264 High]
Multi-Encode1
[Set values: JPEG + H.264 Baseline,
JPEG + H.264 High
]
Multi-Encode2
[Set values: JPEG(1280x960) + MPEG4(640x480)
JPEG(1280x960) + MPEG4(320x240)
JPEG(640x480) + MPEG4(640x480)
JPEG(320x240) + MPEG4(320x240)
]
B Aspect Ratio Selects the width:height ratio of the image.
[Set values: 16:9, 4:3]
C Single-Encode Enables Encoder No.1 only out of three channels of encoders. You can
set a frame rate that exceeds 5 fps.
Encoder
No.1
Framesize Select the frame size of each JPEG or H.264 screen.
Available sizes vary depending on the aspect ratio.
[Set values for aspect ratio 16:9: 1920x1080, 1280x720, 640x360]
[Set values for aspect ratio 4:3: 1280x960, 640x480, 320x240]
Framerate Select a frame rate.
[Set values: 30 fps (this cannot be set for JPEG if the frame size is 1920
x 1080), 25 fps (JPEG is not supported), 15 fps, 10 fps, 7.5
fps, 5 fps, 3 fps, 2 fps, 1 fps]
Bitrate
(Rate
control
mode)
Select whether to set the control rate mode for single encoding to CBR
(Constant Bit Rate) or VBR (Variable Bit Rate).
CBR : Data is encoded at a fixed bit rate regardless of the
condition of input video signals. It is easy to estimate the bit
rate. Select from the list of bit rate ranges.
VBR : The bit rate varies according to the condition of input video
signals. The picture quality is stabled but it is difficult to
estimate the bit rate. Select from the list of bit rate ranges.
[Set values: CBR, VBR]
Bit rate range
[Set values: 64, 128, 256, 384, 512, 768, 1024, 1536, 2048, 3072, 3584,
4096, 8192] kbps
I Frame
Interval
Select the I-frame interval. Encoding starts from the I-frame. Shortening
the interval stabilizes the picture quality even when there area rapid
changes in the video image. However, the picture quality for images with
little change will deteriorate. In addition, when multicast packet loss
occurs, the time interval required to restore the image is shorter.
[Set values: 5, 10, 15, 30, 60, 90, 120] Frame