Filter
Top Products
38
Internet Explorer Setting
Alarm Page (continued)
* The [Set values] in bold letters are factory defaults.
Settings (continued)
E TCP TCP IP Address : Enter the IP address or FQDN of the destination of TCP
notification.
TCP Port Number : Enter the port number of the destination of TCP
notification. (1 to 65535)
TCP Data : Enter a character string to be sent for TCP notification.
You can enter text consisting of up to 127 alphanumeric
characters. Or a text of up to 63 dual-byte characters
can be entered.
JPEG Attachment : Specify whether or not to attach an image file. To attach
JPEG images, check the Attach box and select the
transmission channel.
Encoder : Specifies an Encoder No. for encoding of attached
JPEG files.
Memo:
● You cannot select [Attach JPEG] if there is no channel with Encode set to
JPEG.
E UDP UDP IP Address : Enter the IP address or FQDN of the destination of UDP
notification.
UDP Port Number : Enter the port number of the destination of UDP
notification. (1 to 65535)
UDP Data : Enter a character string to be sent for UDP notification.
You can enter text consisting of up to 127 alphanumeric
characters. Or a text of up to 64 dual-byte characters
can be entered.
E Switch Scene
File
Scene File : Select the scene file to change.
For details of the scene file, see the [Camera] page. (A Page 19)
[Set values: General, Indoor, Outdoor, CLVI, Traffic, DataSaving, Day
(Color), Night (B&W)]
E Position Action Position Number:Sets a position number to move.
[Set values: 0 to 19]
E Play Audio
(VN-H57U/
H257U/H257VPU/
H157WPU only)
Audio File : For selecting the file number to play when the [Action] item is
set to "Play Audio".
[Set values: 1 to 5]
E
Pin Output1 Make,
Pin Output1 Break,
Pin Output2 Make,
Pin Output2 Break
(VN-H57U/H257U/
H257VPU/
H157WPU only)
Alarm Output Duration: For specifying the output time when the [Action] item
is set to "Pin Output1 Make", "Pin Output1 Break",
"Pin Output2 Make", or "Pin Output2 Break".
[Set values: 0 / 100 to 5000] msec