Filter
Top Products
44
Internet Explorer Setting
Storage Page (continued)
* The [Set values] in bold letters are factory defaults.
Settings (continued)
G Constant Sets the continuous recording.
Encoder Selects an Encoder for continuous recording.
Memo:
● You can select an Encoder No. for JPEG file encoding.
Interval Sets a recording interval by seconds.
[Set values: 1 to 65535] sec
File Naming You can select any of three (3) formats of recording file names.
If you select AAutoB, a file name is created based on the year,
month, day, hours, minutes, seconds, and a number.
Example: 20111114161032-001-2.jpg
If you select AManual1B, a file name is created based on the User-
Defined-String which is added by year, month, day, hours,
minutes and seconds.
Example: Camera1_20111114161032001.jpg
If you select AManual2B, a file name is created based on the User-
Defined-String only.
Example: Camera1.jpg
[Set values: Auto, Manual1, Manual2]
Sunday to Saturday Sets the start and end time of recording for each day of week.
[Set values: Unmask All, Mask All, Unmask Span, Mask Span]
If you have selected
A
Specify the time period for invoking the action
B
or
A
Specify to stop the action
B
, you must set the time period.
[Set values: 00H00M-24H00M]
H Alarm Sets alarm recording.
Encoder Sets an encoder for alarm recording and a JPEG frame rate.
[Set values: 5 fps, 3 fps, 2 fps, 1 fps]
Memo:
● You can select an Encoder No. for JPEG.
● The frame rates that can be set vary depending on the
encoding settings.