Lexmark 200 Photo Printer User Manual


 
Memory Device Access Error
Try one or more of the following:
Remove the memory device, and then reinsert it into the card slot or USB port.
Touch OK to clear the message.
Network [x] Software Error
[x] is the number of the network connection.
Try one or more of the following:
Touch Continue to clear the message.
Turn the printer off and then back on to reset the printer.
No Answer
Try one or more of the following:
Verify the fax number, and then resend the fax.
Schedule to send the fax at a later time.
No Email Address
The email contact or at least one member of the group you selected does not have an email address. Try one or more
of the following:
Touch Yes to enter the email address, and then touch Accept every time you add a recipient.
Touch Edit the Group to enter the missing email addresses, and then touch Accept every time you add a recipient.
Touch Send Anyway to send the email only to group members with email addresses.
Touch No to cancel the email.
Paper Tray [x] Detected
Try one or more of the following:
Touch Yes to clear the message.
Touch Change Settings, and then select the paper size and paper type of the media loaded. Touch Accept for each
selection.
Paper Tray [x] Removed
Insert the specified paper tray into the printer, or touch OK.
Phone Connected to Incorrect Jack
Connect the telephone cord to the correct jack at the back of the printer, and then touch OK.
Troubleshooting 147