Panasonic AJ-P2C064AG Camera Accessories User Manual


 
102
Adjustments and Settings for Recording
: Handling data
13
When the jog dial button is pressed, the following
message appears.
14
Turn the jog dial button to move the arrow (cursor) to
YES, and press the jog dial button.
The current white shading correction value, the flare
compensation value, and the RB gain offset correction
value are stored in the built-in memory of the unit.
Note
The values will not be stored in the unit’s internal
memory if another menu screen is selected without
executing WRITE or if the menu is exited.
15
Press the MENU button.
The setting menu is cleared, and the displays showing
the unit’s current statuses appear at the top and bottom
of the viewfinder screen.
1 Using menu operations, open the <LENS FILE> screen
from the FILE page.
2 Turn the jog dial button to move the arrow (cursor) to the
FILE NO. item.
3 Press the jog dial button and the file number will flash.
Turn the jog dial button to select the file (1 to 64) to be
read.
4 Press the jog dial button to enter the file number.
5 Turn the jog dial button to move the arrow (cursor) to the
READ item.
6 When the jog dial button is pressed, the following
message appears.
7 Turn the jog dial button to move the arrow (cursor) to
YES, and press the jog dial button.
The recorded correction values for the white shading,
flare, and RB gain offset are read.
8 Press the MENU button.
The setting menu is cleared, and the displays showing
the unit’s current statuses appear at the top and bottom
of the viewfinder screen.



To read the lens file from the builtin memory





























AJ-HPX3700G-VQT1V68_eng.book 102 ページ 2008年10月15日 水曜日 午後6時38分