Panasonic AJ-P2C064AG Camera Accessories User Manual


 
45
Recording and Playback: Interval Recording
Recording and Playback
Press either the REC START button or VTR button at the
lens, again. Interval recording resumes.
Press the STOP button. Recording stops. Then, the camera
accesses the P2 card to record the video stored in memory
before recording stops. The record from the beginning of the
interval recording to the moment of pressing the STOP
button is generated as one clip.
Setting the menu option INTERVAL REC MODE to “OFF”.
When INTERVAL REC HOLD is set to “OFF”, the mode
returns to ordinary recording mode if the POWER switch of
the unit is turned off.
If INTERVAL REC HOLD is set to “ON”, the interval
recording mode will not change even if the POWER switch is
turned off.
After setting the INTERVAL REC mode, follow these steps:
1 Following basic operations of shooting and recording
according to [Basic Procedures], lock the camera
securely.
2 Press either the REC START button or VTR button at
the lens.
The unit automatically goes into ONE SHOT pause
mode after the specified REC TIME.
3 Performs recording for the duration specified under the
REC TIME option by pressing either the REC START
button or VTR button at the lens, and returns to ONE
SHOT pause mode.
4 Press the STOP button.
The video and sound stored in memory are generated
as one clip.
Press the RET button at the lens to put the unit into REC
REVIEW mode. ONE SHOT operation continues after the
REC REVIEW.
Even during ONE SHOT mode, clips will not be generated
on the P2 card until the STOP button is pressed. Press the
STOP button, and stop ONE SHOT mode operation.
Set the menu option INTERVAL REC MODE to “OFF”.
When INTERVAL REC HOLD is set to “OFF”, the mode
returns to ordinary recording mode if the POWER switch of
the unit is turned off.
If INTERVAL REC HOLD is set to “ON”, the interval
recording mode will not change even if the POWER switch is
turned off.
For continuous recording
To stop recording
To stop the Interval recording mode
Shooting procedures for the ONE SHOT mode of INTERVAL REC
A
t
A
B
t
B
Real-time video/
sound
Content on P2 card
One clip
REC TIME
(Recording time=t)
iREC start
Time Axis
iREC
start
STOP button
Previous clip
To check the previous recording during a pause
To divide clips or to change the P2 card used for
recording
To stop the ONE SHOT mode of INTERVAL REC
AJ-HPX3700G-VQT1V68_eng.book 45 ページ 2008年10月15日 水曜日 午後6時38分