Panasonic AJ-P2C064AG Camera Accessories User Manual


 
172
Menu: Menu Description Tables
* This variable range is the numerical values for 59.94 Hz. For
50 Hz, the frame rate is up to 24f. The frame rate is up to 23f in
24PN (Native) mode.
Note
Displayed REC TIME, PAUSE TIME and TOTAL REC TIME
are translated into either drop-frame or non-drop-frame
according to the mode of operation.
TAKE TOTAL TIME is actual time. Therefore, TOTAL REC
TIME may incorporate fractions, depending on the settings.
REC FUNCTION
Items/
Data Saved
Adjustable
Range
Remarks
INTERVAL REC
MODE
ON
ONE SHOT
OFF
Sets INTERVAL REC function.
ON: Uses internal memory to perform
interval recording.
ONE SHOT:
Performs “one-shot” recording
for the duration specified under
REC TIME, and then stops.
OFF: INTERVAL REC is not
performed.
Note
This item cannot be changed when “ON”
is selected in LOOP REC MODE.
–CUF–
INTERVAL REC
HOLD
ON
OFF
Selects whether INTERVAL REC MODE
settings are retained or not when the
power is turned off once.
ON: Retain
OFF: Do not retain. The INTERVAL
REC MODE is “OFF” whenever
the power is turned on again.
–CUF–
REC TIME* 00s01f
:
59s29f
Set recording time for INTERVAL REC
(1 cut).
Note
However the settings can be made
frame by frame, and the numbers of the
cut-off unit frames for the shortest time
period and the set time on the actual
operation may vary with the recording
method. For details, refer to [Interval
Recording] (page 44).
–CUF–
PAUSE TIME* 00h00m00s01f
:
00h04m59s23f
:
23h59m59s29f
Specify pause time for INTERVAL REC.
Note
However the settings can be made
frame by frame, and the numbers of the
cut-off unit frames for the shortest time
period and the set time on the actual
operation may vary with the recording
method. For details, refer to [Interval
Recording] (page 44).
–CUF–
TAKE TOTAL
TIME
NONE
:
5day
Specify the time needed for INTERVAL
REC.
Select from “NONE” (continue until
operation is manually stopped) to
5 days.
–CUF–
TOTAL REC
TIME*
NONE
00m00s01f
:
99m59s29f
OVER100min
Display total recorded time for
INTERVAL REC. The setting cannot be
changed using this option. Displays the
recording time (recording time needed
for the P2 card) calculated using REC
TIME, PAUSE TIME, and TAKE TOTAL
TIME.
Note
A value based on actual processing is
displayed.
–––––
AUDIO REC ON
OFF
Select whether or not sound will be
recorded during INTERVAL REC.
–CUF–
START DELAY 0SEC
:
10SEC
Set the delay after pressing REC START
to start recording in INTERVAL REC.
–CUF–
Items/
Data Saved
Adjustable
Range
Remarks
PRE REC MODE ON
OFF
Select whether or not to enable PRE
RECORDING.
ON: PRE RECORDING enabled.
OFF: PRE RECORDING disabled.
Note
Specify the PRE RECORDING time by
using the menu option PRE REC TIME.
–CUF–
PRE REC TIME 1SEC
:
8SEC
Set PRE RECORDING.
1-8SEC:
Set the length of time that can be
retrospectively recorded before
the REC START button is
pressed.
–CUF–
LOOP REC
MODE
ON
OFF
Select whether or not to enable LOOP
REC.
This setting can be used with PRE
RECORDING features.
ON: Enable LOOP REC.
OFF: Disable LOOP REC.
Notes
After the power is turned off, this item
will default to “OFF” the next time the
power is turned on.
This item cannot be changed when
“ON” or “ONE SHOT” is selected in
INTERVAL REC MODE.
–––F–
REC START ALL
NORMAL
Select operating modes that allow
recording to start.
ALL: Allow recording to start during
stop, recording pause, and
playback.
NORMAL:
Allow recording to start during
stop and recording pause.
Note
Even if this is set to “ALL”, the operation
is “NORMAL”, when “ON” or “ONE
SHOT” is selected in INTERVAL REC
MODE.
–CUF–
P.ON REC SLOT
SEL
HOLD
SLOT1
Select the recording order of the slot
when the power is turned on.
HOLD: The recording order starts with
the card previously selected
when the power was turned off.
SLOT1:
The recording order starts with
the card that is inserted in slot 1
when the power is turned on.
–CUF–
Example of drop-frame
REC TIME 02s00f
PAUSE TIME 02s00f
TAKE TOTAL TIME 40min
TOTAL REC TIME 19m59s06f
AJ-HPX3700G-VQT1V68_eng.book 172 ページ 2008年10月15日 水曜日 午後6時38分