Filter
Top Products
79
Adjustments and Settings for Recording
: Viewfinder Screen Status Displays
Adjustments and Settings for Recording
Information Item Indication Status
8. Battery type (when
MODE CHECK is
being performed)
PRO14 - AC ADPT Battery type, selected through a menu option. “AC ADPT” indicates when an
external DC power supply has been input.
9. Battery remaining
level/voltage
.V
%
EMP
MAX
Battery remaining level in tenths of a volt
The battery level of batteries having a level indicating function is displayed as a
percentage.
Where the battery has a level indicating function, this indicates that the battery
is empty.
Where the battery has a level indicating function, this indicates that the battery
is fully charged.
10. MODE CHECK
Indication Area
LOW/MID/HIGH
–3 to 30
Value set for the master gain
Example: LOW: 0
(STATUS: Master gain)
(Cause of !LED
illumination: displayed full-
screen)
Indications selected
through the menu
option !LED are marked
with [ ! ].
Indications which may
activate the !LED are
marked with [ ].
GAIN (0dB)
SHUTTER
WHITE PRE.
EXTENDER
B.GAMMA
MATRIX
COLOR COR.
FILTER
Gain status
Shutter status
White balance status
Extender status (EX2 or OFF)
BLACK GAMMA status (ON or OFF)
MATRIX status (A, B, or OFF)
Color correction status (ON or OFF)
Filter status
(FUNCTION: HD SDI A ·
B)
OUTPUT: MEM/CAM/OFF
TYPE: 4:2:2/4:4:4
CHAR: A/B/BOTH
Position of OUTPUT SEL switch.
Indicates current setting of SIGNAL FORMAT.
SIGNAL FORMAT is selected in the <OUTPUT SEL> screen of the SYSTEM
SETTING page.
Indicates current setting of HD SDI A · B CHAR.
HD SDI A · B CHAR is set from the <OUTPUT SEL> screen of the SYSTEM
SETTING page.
(FUNCTION: MON OUT) OUTPUT: MEM/CAM/OFF
SELECT: VBS/HD SDI
CHAR: ON/OFF
Position of OUTPUT SEL switch.
Indicates current setting of MONITOR OUT.
MONITOR OUT is set from the <OUTPUT SEL> screen of the SYSTEM
SETTING page.
Indicates current setting of MON OUT CHARACTER switch.
(FUNCTION: P2CARD
STATUS)
TOTAL
SLOT1/SLOT2/SLOT3/
SLOT4/SLOT5
OP-SLOT
Total remaining free space/capacities of the P2 cards loaded in P2 card slots
1-5.
Status and remaining free space/capacity of each card. The numbers denote
the P2 card slot numbers.
The card status is indicated as:
ACTIVE/ACCESSING/INFO READING/FULL/PROTECTED/
NOT SUPPORTED/FORMAT ERROR/NO CARD/PROXY
For details of statuses, see [P2 card access LED and status of P2 cards]
(page 32).
Indicates optional slot status.
The card status is indicated as:
PROXY/NO CARD/NOT SUPPORTED
(AUDIO: Enabling or
disabling the FRONT
AUDIO LEVEL control)
CH1: ON/OFF
CH2: ON/OFF
If the FRONT AUDIO LEVEL control is in effect for channel 1, then “ON” is
indicated. If not, “OFF” is indicated.
If the FRONT AUDIO LEVEL control is in effect for channel 2, then “ON” is
indicated. If not, “OFF” is indicated.
(AUDIO: Phantom power
status for the microphone)
FRONT: ON/OFF
REAR: ON/OFF
Phantom power status of the front microphone
Phantom power status of the rear microphone
For more information, see [MIC/AUDIO2] (page 199).
(AUDIO: Input signal and
level for each channel)
FRONT/W.L./REAR
CH1/2/3/4
Input signal and level for each channel
AJ-HPX3700G-VQT1V68_eng.book 79 ページ ２００８年１０月１５日 水曜日 午後６時３８分