Panasonic AJ-P2C064AG Camera Accessories User Manual


 
173
Menu: Menu Description Tables
Menu
OUTPUT SEL
Items/
Data Saved
Adjustable
Range
Remarks
SIGNAL
FORMAT
4:2:2
4:4:4
Select the signal that is output from the
HD SDI A · B connectors.
4:2:2: YP
BPR 4:2:2 format is selected.
4:4:4: RGB 4:4:4 format is selected.
LINK A will be output from the
HD SDI A connector, and LINK B
from the HD SDI B connector.
–CUF–
P-10LOG ON
OFF
ON: P-10LOG format signal is output.
This is valid when GAMMA
MODE SEL is set to “FILM-
REC”, and SIGNAL FORMAT is
set to “4:4:4”.
OFF: Signal format set in GAMMA
MODE SEL is output.
Note
If you select “ON” in this item, 2D-CMS
will operate simultaneously as well.
–CUF–
OUTPUT ITEM MENU ONLY
TC
STATUS
Set the character contents
superimposed onto the output signals for
the HD SDI A · B connector and MON
OUT connector.
MENU ONLY:
Displays only when the menu
characters are superimposed.
No display appears when other
characters are superimposed.
TC: Display the time code. (Displays
the menu when menu characters
are superimposed.)
Note that when 1080/23.98PsF
or 1080/24PsF has been
selected in the SYSTEM MODE
menu option, the frame digits will
not be updated correctly.
STATUS:
Display the same characters
superimposed on the viewfinder
signal. (Displays the menu when
menu characters are
superimposed.)
–CUF–
HD SDI A · B
CHAR
OFF
A
B
BOTH
Select whether to superimpose
characters on the HD SDI A · B
connector. (The character content output
from the HD SDI A · B and MON OUT
connectors is the same.)
OFF: The characters are not
superimposed.
A: The characters are
superimposed on the HD SDI A
connector.
B: The characters are
superimposed on the HD SDI B
connector.
BOTH: The characters are
superimposed on the HD SDI A
connector and the HD SDI B
connector.
–CUF–
Items/
Data Saved
Adjustable
Range
Remarks
MONITOR OUT VBS
HD SDI
Select the output signal on the MON
OUT connector.
–CUF–
MONITOR
GAMMA
ON
OFF
This sets whether to perform telecine
conversion correction on the MON OUT,
RC OUT, and LCD OUT signals when
GAMMA MODE SEL is set to “FILM-
REC”.
ON: Correction is performed.
OFF: Correction is not performed.
–CUF–
VF/LCD CHAR VF-OFF
LCD-OFF
ON
This sets whether to superimpose
characters on the video shown on the
LCD monitor and in the viewfinder.
Note, however, that the characters are
output to one of the MON OUT, VF OUT
and LCD OUT signals.
–CUF–
VF MODE MEM
CAM
Select the image to display in the
viewfinder.
MEM: Display the playback image in
the playback mode. Display the
camera image at other times.
CAM: Always display the camera
image.
–CUF–
VF SEL MONO
COLOR
Select the video signal that is output to
the viewfinder connector.
MONO:Output the Y signal alone to the
viewfinder connector.
COLOR:
Output the Y, PB, and PR signals
to the viewfinder connector.
–CUF–
THUMBNAIL
OUT
ON
OFF
Select whether or not to output clip
thumbnails displayed on the LCD
monitor to the MON OUT (VBS) signal
and the REMOTE connector.
ON: Enable output.
OFF: Disable output.
Note
Even when the MON OUT OUTPUT SEL
switch is in the [CAM] position,
thumbnails are output when this option is
set to “ON”.
–CUF–
DOWNCON
MODE
SQUEEZE
LT-BOX
For setting the mode of the down
converter output signals.
–CUF–
AJ-HPX3700G-VQT1V68_eng.book 173 ページ 2008年10月15日 水曜日 午後6時38分