123
Preparation: Connection of the remote control unit (AJ-RC10G)
Preparation
It is possible to control some of the functions remotely by
connecting the remote control unit AJ-RC10G (optional).
When AJ-RC10G is connected to the REMOTE connector
on the unit and the power switches of both of the unit and
AJ-RC10G are turned on, the unit automatically enters the
remote control mode.
The remote control mode is released when AJ-RC10G is
removed or the power for the AJ-RC10G is turned off.
In the remote control mode, the following switches and
buttons on the unit are disabled.
SHUTTER switch
MENU button
Jog dial button
GAIN switch
OUTPUT/AUTO KNEE switch
WHITE BAL switch
USER MAIN button
USER 1 button
USER 2 button
When the remote control is connected, recording and
playback can be controlled through both the unit and the AJ-
RC10G.
Notes
The state that was adjusted by connecting AJ-RC10G is
stored in the unit. Not to store the adjusted state in the
unit, open the FUNCTION MENU of AJ-RC10G to set the
RC DATA SAVE item to “OFF”.
When the dedicated cable is connected or removed,
ensure that the POWER switches on both the main unit
and AJ-RC10G are turned off.
Use Ver 1.11-00-000 or a later version of AJ-RC10G.
See the P2 support page on the following website for
information about upgrades to AJ-RC10G.
https://eww.pavc.panasonic.co.jp/pro-av/
a. REMOTE connector
b. Dedicated cable
When this unit and AJ-RC10G are connected, the following
functions differ from those described in the operating
instructions that accompany AJ-RC10G.
A. KNEE ON button
When “DRS” has been selected in the AUTO KNEE SW
menu option of this unit, this button can be used to
switch DRS on/off. This button is lit when DRS is on and
not lit when DRS is off.
The menu option AUTO KNEE SW can be found in the
<SW MODE> screen on the CAM OPERATION page.
Connection of the remote control unit
(AJ-RC10G)
Switch functions in the remote control mode
Recording and playback Operations in the
remote control mode
Notes for the remote control unit
AJ-RC10G
a
b
AJ-HPX3700G-VQT1V68_eng.book 123 ページ 2008年10月15日 水曜日 午後6時38分