Filter
Top Products
210
Specifications
GENLOCK IN:
BNC1, 1.0 V
P-P, 75 Ω
(This is available as the return video input connector.)
MON OUT:
BNC1
(It can be switched among HD SDI/VBS.)
HD SDI: 0.8 V
P-P, 75 Ω
(Compliant with the SMPTE292M/
299M standards)
VBS: 1.0 V
P-P, 75 Ω
HD SDI A:
BNC1
HD SDI: 0.8 V
P-P, 75 Ω
(Compliant with the SMPTE292M/
299M/372M/352M standards)
Dual Link with HD SDI B supported
HD SDI B:
BNC1
HD SDI: 0.8 V
P-P, 75 Ω
(Compliant with the SMPTE292M/
299M/372M/352M standards)
Dual Link with HD SDI A supported
TC IN:
BNC1, 0.5 V
P-P to 8 VP-P, 10 kΩ
TC OUT:
BNC1, 2.0±0.5 V
P-P, low impedance
AUDIO IN CH1/CH2:
XLR2, 3 pins
LINE, MIC, and +48 V switch-selectable
LINE: +4 dBu
(–3 dBu/0 dBu/+4 dBu selectable
with menu)
MIC: –60 dBu (–60 dBu/–50 dBu
selectable with menu)
MIC +48 V: Compatible with +48 V phantom
power supply
–60 dBu (–60 dBu/–50 dBu
selectable with menu)
MIC IN:
XLR1, 5 pins
+48 V phantom (on/off selectable with menu)
–40 dBu (–50 dBu/–40 dBu selectable with menu)
WIRELESS IN:
25 pin, D-SUB, –40 dBu
AUDIO OUT CH1/CH2:
XLR1, 5 pins, +4 dBu
(–3 dBu/0 dBu/+4 dBu selectable with menu)
Balanced low-impedance output
Headphones:
Stereo mini jack2
DC IN:
XLR1, 4 pins, DC 12 V (DC 11.0 V to 17.0 V)
DC OUT:
4 pins, DC 12 V (DC 11.0 V to 17.0 V)
Maximum rated current: 1.5 A
LENS:
12 pins
EVF:
20 pins
REMOTE:
10 pins (connector for AJ-RC10G)
GPS:
6 pins (connector for AJ-GPS910G)
USB 2.0 (HOST):
Type-A connector, 4-pin, in accordance with USB
Ver. 2.0
USB 2.0 (DEVICE):
Type-B connector, 4-pin, in accordance with USB
Ver. 2.0
Shoulder Strap
Front Audio Level control knob
Control knob mounting screw1
CD-ROM
Weight and dimensions when shown are approximately.
Specifications are subject to change without notice.
Input/output Unit
Accessories
AJ-HPX3700G-VQT1V68_eng.book 210 ページ ２００８年１０月１５日 水曜日 午後６時３８分