Panasonic AJ-P2C064AG Camera Accessories User Manual


 
198
Menu: Menu Description Tables
Note
The frequency characteristics when the microphone low cut
filter is applied are 200 Hz to 10 kHz.
MIC/AUDIO1
Items/
Data Saved
Adjustable
Range
Remarks
FRONT VR CH1 OFF
FRONT
W.L.
REAR
ALL
Select whether or not to enable the
FRONT AUDIO LEVEL control for the
signal selected as the input signal to
AUDIO IN CH1.
OFF: Disabled for any input selected.
Recording level does not change
by turning the volume control.
FRONT:
Only enabled when [FRONT] is
selected.
W.L.: Only enabled when [W.L.]
(wireless) is selected.
REAR: Only enabled when [REAR] is
selected.
ALL: Enabled for any input selected.
–CUF–
FRONT VR CH2 OFF
FRONT
W.L.
REAR
ALL
Select whether or not to enable the
FRONT AUDIO LEVEL control for the
signal selected as an input signal to
AUDIO IN CH2.
OFF: Disabled for any input selected.
Recording level does not change
by turning the volume control.
FRONT:
Only enabled when [FRONT] is
selected.
W.L.: Only enabled when [W.L.]
(wireless) is selected.
REAR: Only enabled when [REAR] is
selected.
ALL: Enabled for any input selected.
–CUF–
MIC LOWCUT
CH1
OFF
FRONT
W.L.
REAR
Select the microphone low cut filter for
input CH1.
OFF: The microphone low cut filter is
disabled for any input.
FRONT:
The microphone low cut filter is
enabled when the front
microphone is selected.
W.L.: The microphone low cut filter is
enabled only when the wireless
microphone is selected.
REAR: The microphone low cut filter is
enabled only when the rear
microphone is selected.
–CUF–
MIC LOWCUT
CH2
OFF
FRONT
W.L.
REAR
Select the microphone low cut filter for
input CH2.
OFF: The microphone low cut filter is
disabled for any input.
FRONT:
The microphone low cut filter is
enabled when the front
microphone is selected.
W.L.: The microphone low cut filter is
enabled only when the wireless
microphone is selected.
REAR: The microphone low cut filter is
enabled only when the rear
microphone is selected.
–CUF–
MIC LOWCUT
CH3
OFF
FRONT
W.L.
REAR
Select the microphone low cut filter for
input CH3.
OFF: The microphone low cut filter is
disabled for any input.
FRONT:
The microphone low cut filter is
enabled when the front
microphone is selected.
W.L.: The microphone low cut filter is
enabled only when the wireless
microphone is selected.
REAR: The microphone low cut filter is
enabled only when the rear
microphone is selected.
–CUF–
Items/
Data Saved
Adjustable
Range
Remarks
MIC LOWCUT
CH4
OFF
FRONT
W.L.
REAR
Select the microphone low cut filter for
input CH4.
OFF: The microphone low cut filter is
disabled for any input.
FRONT:
The microphone low cut filter is
enabled when the front
microphone is selected.
W.L.: The microphone low cut filter is
enabled only when the wireless
microphone is selected.
REAR: The microphone low cut filter is
enabled only when the rear
microphone is selected.
–CUF–
LIMITER CH1 ON
OFF
Select the limiter.
The limiter is enabled when AUDIO
SELECT CH1 switch is set to [MAN].
–CUF–
LIMITER CH2 ON
OFF
Select the limiter.
The limiter is enabled when AUDIO
SELECT CH2 switch is set to [MAN].
–CUF–
AUTO LEVEL
CH3
ON
OFF
Select the level setting method.
For more information, see [CH3 and
CH4 Recording Levels] (page 62)
–CUF–
AUTO LEVEL
CH4
ON
OFF
Select the level setting method.
For more information, see [CH3 and
CH4 Recording Levels] (page 62)
–CUF–
TEST TONE OFF
NORMAL
ALWAYS
CHSEL
Select the test signal.
OFF: Disable test tone output.
NORMAL:
Test tone signals are output to all
of CH1 - CH4 when the
OUTPUT/AUTO KNEE selector
switch has been switched to
[BARS] and CH1 of the AUDIO
IN switch has been switched to
[FRONT].
ALWAYS:
Test tone signals are always
output to all of CH1 - CH4 when
the OUTPUT/AUTO KNEE
selector switch has been
switched to [BARS].
CHSEL:
Output test tone to the channels
where the AUDIO IN switch CH1
or CH2 is set to [FRONT] when
OUTPUT/AUTO KNEE selector
switch is set to [BARS]. The test
tone is not output to CH3 and
CH4.
–CUF–
AJ-HPX3700G-VQT1V68_eng.book 198 ページ 2008年10月15日 水曜日 午後6時38分