Filter
Top Products
132
Manipulating Clips with Thumbnails
: Shot Mark
A shot mark can be added to a clip thumbnail to distinguish this clip from the others.
1 Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2 Use the cursor buttons to move the pointer over the clip
to which you want to attach a shot mark.
3 Press the SHOT MARKER button.
4 A shot mark will be attached to the clip thumbnail under
the pointer.
To delete a shot mark, reposition the pointer over the
clip and press the SHOT MARKER button.
Notes
A shot mark can be attached during recording. Please
refer to [Shot Mark Function] (page 48) for more
information.
When adding a shot mark to (or deleting the shot mark
from) a clip recorded across multiple P2 cards, do this with
all these P2 cards inserted into P2 card slots.
a. SHOT MARKER button
During recording or playback, you can add text memos to clips. Text memos can be used to play back clips at some point or
break clips into chunks and copy the necessary portions.
Text memos can be added in one of the following ways.
Press the TEXT MEMO button during recording or
playback of a clip. A text memo is added to the position
where the button is pressed.
Press the TEXT MEMO button when the thumbnail screen
is displayed. A text memo is added to the beginning of the
clip.
Note
One clip can have up to 100 text and voice memos in
combination. Note that the unit is not capable of adding or
showing voice memos.
a. TEXT MEMO button
Shot Mark
a
Text Memo
Adding a text memo
a
AJ-HPX3700G-VQT1V68_eng.book 132 ページ ２００８年１０月１５日 水曜日 午後６時３８分